1.How many full turns should the handle of the trailer landing gear make after cranking up the trailer landing gear of a Class I vehicle?
Correct!
Wrong!
0/1
Progress
2.Which of the following should be engaged when safely checking the cab of a Class I tractor trailer vehicle?
Correct!
Wrong!
0/2
Progress
3.Which of the following vehicles require a medical certificate or examination as a requirement for driving?
Correct!
Wrong!
0/3
Progress
4.Which of the following is NOT part of the Outside Light and General Check of a Class II vehicle?
Correct!
Wrong!
0/4
Progress
5.Once the air lines and light cords are disconnected in logical order, where should they be secured afterwards?
Correct!
Wrong!
0/5
Progress
6.While inspecting a vehicle prior to use, what should an operator do when they come across lights on the truck and trailer that are dirty or grimy?
Correct!
Wrong!
0/6
Progress
7.For a goose neck hitch, what needs to be in place for the coupling to be secure?
Correct!
Wrong!
0/7
Progress
8.The coupling of the 5th wheel jaws and kingpin should be checked and double checked for which of the following?
Correct!
Wrong!
0/8
Progress
9.The windshield of the Class I tractor trailer vehicle should be checked for which of the following before operating?
Correct!
Wrong!
0/9
Progress
10.Tires should always be checked for which of the following before operating the vehicle?
Correct!
Wrong!
0/10
Progress
11.Often the tractor and trailer are connected by 5th wheel jaws and a kingpin, but there are other types of hitches used as well. What is another type of hitch used?
Correct!
Wrong!
0/11
Progress
12.In a Class I vehicle, from what position should the operator check to see if the jaws are open and the pin is lined up with the 5th wheel?
Correct!
Wrong!
0/12
Progress
13.How many passengers are Class IV permitted to transport at one time?
Correct!
Wrong!
0/13
Progress
14.Which is the last step an operator must preform during an uncoupling procedure of a Class I vehicle?
Correct!
Wrong!
0/14
Progress
15.What part of a Class II vehicle must be check for free play during the in cab pre-operating inspection?
Correct!
Wrong!
0/15
Progress
16.Which of the following vehicles cite a valid PEI driver's licence as a requirement for driving?
Correct!
Wrong!
0/16
Progress
17.Which gear should the handle of the trailer landing gear be in during the uncoupling of a Class I vehicle?
Correct!
Wrong!
0/17
Progress
18.Once the landing gear on a Class III vehicle has been raised, the handle must be reversed and then secured in which of the following ways?
Correct!
Wrong!
0/18
Progress
19.After applying the tractor parking brake during the uncoupling of a Class tractor trailer, it's necessary to pause to ensure which of the following?
Correct!
Wrong!
0/19
Progress
20.Which of the following is NOT required for the Class I Tractor Trailer driver's licence?
Please select 2 correct answers
Correct!
Wrong!
0/20
Progress
21.Which of the following is NOT part of the In Cab inspection of a Class II vehicle?
Correct!
Wrong!
0/21
Progress
22.When coupling a trailer with a ball hitch, where must the ball be in relation to the hitch for it to be secured properly?
Correct!
Wrong!
0/22
Progress
23.Before operating the truck and trailer of a Class I vehicle, what must the exhaust be checked for?
Correct!
Wrong!
0/23
Progress
24.Which of the following vehicles might be equipped with safety chains for use during the coupling and uncoupling procedure?
Correct!
Wrong!
0/24
Progress
25.Before a licence can be upgraded, what must be completed before the road test can be conducted?
Correct!
Wrong!
0/25
Progress
26.When placing chock blocks during the uncoupling procedure, where do they go in relation to the trailer?
Correct!
Wrong!
0/26
Progress
27.When attaching the trailer to the tractor, this process is called what?
Correct!
Wrong!
0/27
Progress
28.Which seatbelts must be in good working order for Class I, Class II, Class III, and Class IV vehicles?
Correct!
Wrong!
0/28
Progress
29.When coupling the truck and trailer for a Class III vehicle, the wheel chocks must be removed after the trailer has been successfully hitched to the truck. Which of the following must be checked before the rig can leave after they have been removed?
Correct!
Wrong!
0/29
Progress
30.When removing the trailer from the tractor, this process is called what?
Correct!
Wrong!
0/30
Progress
31.Which step in the uncoupling procedure for a Class III vehicle comes after the 5th wheel locks have been locked to an 'open position'?
Correct!
Wrong!
0/31
Progress
32.What general method of inspection is required around the vehicle before each and every time a driver takes the truck out for a days work?
Correct!
Wrong!
0/32
Progress
33.What is the first step in a Class III uncoupling procedure?
Correct!
Wrong!
0/33
Progress
34.What device should be engaged in a Class III vehicle while testing the coupling of the 5th wheel jaw and kingpin or goose neck hitch and ball?
Correct!
Wrong!
0/34
Progress
35.What brake should be applied after the operator has tested the coupling of the 5th wheel jaws and the kingpin?
Correct!
Wrong!
0/35
Progress
36.Which type of brakes need to be checked before operating the tractor trailer?
Correct!
Wrong!
0/36
Progress
37.What is the final step a driver must perform when disconnecting the tractor from the trailer during the uncoupling procedure in a Class I vehicle?
Correct!
Wrong!
0/37
Progress
38.Where should the operator of the tractor trailer stand when checking and adjusting the height of the trailer?
Correct!
Wrong!
0/38
Progress
39.In what order should the air lines and light cord be connected?
Correct!
Wrong!
0/39
Progress
40.When should the hand control valve be released during the coupling procedure in a Class I coupling procedure?
Correct!
Wrong!
0/40
Progress
41.Why is it necessary to check behind the trailer and remove any obstacles after the wheel chock blocks have been put in place?
Correct!
Wrong!
0/41
Progress
42.Which three security and exit components must be checked in the cab of the vehicle during the Class III pre-operating inspection?
Correct!
Wrong!
0/42
Progress
43.How long must a person have their driver's licence before they are allowed to upgrade to a Class II?
Correct!
Wrong!
0/43
Progress
44.What is the minimum age requirement for obtaining the Class I Driver's Licence?
Correct!
Wrong!
0/44
Progress
45.When should the wheel chocks be removed from the tractor trailer?
Correct!
Wrong!
0/45
Progress
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
0/45
Progress
0
Correct
0
Incorrect
X
Ace the DMV Exam on
Ace the DMV Exam on Your First Attempt
Unlimited mock tests
Access Over 1000 Exam Like Questions for Just $3