Truck Test 2
1.How many full turns should the handle of the trailer landing gear make after cranking up the trailer landing gear of a Class I vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
2.Which of the following should be engaged when safely checking the cab of a Class I tractor trailer vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
3.Which of the following vehicles require a medical certificate or examination as a requirement for driving?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
4.Which of the following is NOT part of the Outside Light and General Check of a Class II vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
5.Once the air lines and light cords are disconnected in logical order, where should they be secured afterwards?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
6.While inspecting a vehicle prior to use, what should an operator do when they come across lights on the truck and trailer that are dirty or grimy?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
7.For a goose neck hitch, what needs to be in place for the coupling to be secure?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
8.The coupling of the 5th wheel jaws and kingpin should be checked and double checked for which of the following?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
9.The windshield of the Class I tractor trailer vehicle should be checked for which of the following before operating?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
10.Tires should always be checked for which of the following before operating the vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
11.Often the tractor and trailer are connected by 5th wheel jaws and a kingpin, but there are other types of hitches used as well. What is another type of hitch used?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
12.In a Class I vehicle, from what position should the operator check to see if the jaws are open and the pin is lined up with the 5th wheel?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
13.How many passengers are Class IV permitted to transport at one time?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
14.Which is the last step an operator must preform during an uncoupling procedure of a Class I vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
15.What part of a Class II vehicle must be check for free play during the in cab pre-operating inspection?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
16.Which of the following vehicles cite a valid PEI driver's licence as a requirement for driving?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
17.Which gear should the handle of the trailer landing gear be in during the uncoupling of a Class I vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
18.Once the landing gear on a Class III vehicle has been raised, the handle must be reversed and then secured in which of the following ways?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
19.After applying the tractor parking brake during the uncoupling of a Class tractor trailer, it's necessary to pause to ensure which of the following?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
20.Which of the following is NOT required for the Class I Tractor Trailer driver's licence?
Please select 2 correct answers
Correct!
Wrong!
Progress
0 /45
Truck Test 2
21.Which of the following is NOT part of the In Cab inspection of a Class II vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
22.When coupling a trailer with a ball hitch, where must the ball be in relation to the hitch for it to be secured properly?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
23.Before operating the truck and trailer of a Class I vehicle, what must the exhaust be checked for?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
24.Which of the following vehicles might be equipped with safety chains for use during the coupling and uncoupling procedure?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
25.Before a licence can be upgraded, what must be completed before the road test can be conducted?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
26.When placing chock blocks during the uncoupling procedure, where do they go in relation to the trailer?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
27.When attaching the trailer to the tractor, this process is called what?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
28.Which seatbelts must be in good working order for Class I, Class II, Class III, and Class IV vehicles?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
29.When coupling the truck and trailer for a Class III vehicle, the wheel chocks must be removed after the trailer has been successfully hitched to the truck. Which of the following must be checked before the rig can leave after they have been removed?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
30.When removing the trailer from the tractor, this process is called what?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
31.Which step in the uncoupling procedure for a Class III vehicle comes after the 5th wheel locks have been locked to an 'open position'?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
32.What general method of inspection is required around the vehicle before each and every time a driver takes the truck out for a days work?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
33.What is the first step in a Class III uncoupling procedure?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
34.What device should be engaged in a Class III vehicle while testing the coupling of the 5th wheel jaw and kingpin or goose neck hitch and ball?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
35.What brake should be applied after the operator has tested the coupling of the 5th wheel jaws and the kingpin?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
36.Which type of brakes need to be checked before operating the tractor trailer?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
37.What is the final step a driver must perform when disconnecting the tractor from the trailer during the uncoupling procedure in a Class I vehicle?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
38.Where should the operator of the tractor trailer stand when checking and adjusting the height of the trailer?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
39.In what order should the air lines and light cord be connected?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
40.When should the hand control valve be released during the coupling procedure in a Class I coupling procedure?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
41.Why is it necessary to check behind the trailer and remove any obstacles after the wheel chock blocks have been put in place?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
42.Which three security and exit components must be checked in the cab of the vehicle during the Class III pre-operating inspection?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
43.How long must a person have their driver's licence before they are allowed to upgrade to a Class II?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
44.What is the minimum age requirement for obtaining the Class I Driver's Licence?
Correct!
Wrong!
Progress
0 /45
Truck Test 2
45.When should the wheel chocks be removed from the tractor trailer?
Correct!
Wrong!
Progress
0 /45
Your Progress 0/45
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
0 Correct
x 0 Incorrect
- Passing Score 80%
X
Ace the DMV Exam on
![](/wp-content/uploads/2023/09/bgimg.png)
Ace the DMV Exam on Your First Attempt
Unlimited mock tests
Access Over 1000 Exam Like Questions for Just $3
![](/wp-content/uploads/2023/09/percentage.png)
Ace the DMV Exam on
Your First Attempt
![](/wp-content/uploads/2023/09/bgimg.png)